- For carrying unique frames on hang-on type car racks
- Quick release clamp adjusts to fit between stem and seatpost
- Rubberized hooks protect bikes finish
Throw your tailgate cover on, cinch it down, load up the bikes and go. There is no easier way to head to the top. With 6 straps, the Large Camo Tailgate Cover can help shuttle your whole crew while protecting your bikes and pickup from dings and scratches.
- Fits most full-size trucks
- Premium padded tailgate protection
- Flap for easy access to tailgate handle
- Six webbing straps for attachment
- Dimensions: 34L x 62W x 19H in / 86.4L x 157.5W x 48.3H cm
So the international bike builder didn’t consider your bike rack design when creating his new full suspension frame? No worries. Kuat’s Ubar can adapt almost any frame to fit our Alpha or Beta rack.
Features
- Adapts oddly shaped frames for use with hanging style racks
- Spring loaded for a solid fit
- Coated hooks (prevent wear on your bike)
- Installs in seconds
- Fits most bikes
For those cases where fitment just isn't right. The Hi-Lo is a 2" hitch Extension & Rise/Drop built with Kuat style. It provides 7" or 10" of extension and 2.125" of rise/drop. The Hi-Lo comes with a threaded hitch pin to ensure a tight fit in your receiver. Approved for use with the Kuat NV 2.0, Base 2.0, Sherpa 2.0 and Transfer family.
RackDock from Kuat. A sophisticated solution for storing your hitch rack. Easy wall installation and the ability to hold up to 100lbs keeps your hitch rack secure and out of the way in the garage, preventing damage to the rack, cars, and of course—bikes.
- Supports up to a 4-bike rack (100 lb max)
- All hardware included
- 2" hitch and 1.25" hitch adaptor included
- Magnetic faceplate
The Hi-Lo Pro takes our Hi-Lo to the next level. We have added our proprietary Flat-lock hitch cam that ensures a zero-wobble user experience. We have also included our fully redesigned hitch lock.
- Hi-Lo Pro is a 2” hitch extension (works with 2” hitch receivers) with a 250 lb. weight limit
- Provides 2" of drop or 2" of rise to the vehicle receiver
- Provides 10” of Hitch Extension
- Matte Black with black water transfer logos
- Patent Pending
- No Worries Warranty
- Approved for use with the NV 2.0 (including NV 2.0 Add-On), Base 2.0 (including NV Base 2.0 Add-on) Sherpa 2.0, Transfer family, and the original NV 2” 2-bike only
Like the first version, the Pivot v2 will make sure your rack never gets in the way. Smoothly swing up to a 4-bike rack to the side for clear access to tailgates, rear doors, and hatchbacks. And when it’s time to load up, the locking mechanism makes sure your rack only moves when you want it to.
- Clearance for tailgates or rear doors
- Proprietary FLATLOCK cam system
- Locking hitch pin
- Lifetime Warranty
- 2” Hitch Only
- Quick-release 90 or 120 degree swing away
- Driver-Side or Passenger-Side Swing Options
- Compatible with fully loaded 4-bike NV 2.0
- Load up to a maximum of 250lbs
Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.
Provides a clean and sleek look for your Saris Bones rack, these end caps allow excess strap length to be tucked neatly inside rack
- Provides a clean and sleek look for your Saris Bones rack
- Upgrade your current Bones or Bones EX rack (pre-2022)
- Compatible with: Bones or Bones EX racks
- Not compatible to use with any Bones Hitch racks or SUPERBones
Increase rack stability for a smoother ride, this clamp system securely tightens hitch rack to receiver.
- Adds extra security to bike racks and hitch devices
- Eliminates rattling and wobbling
- Compatible with 2" receivers
Turn your hard to fit vehicle into a bike hauling machine, Hatch Huggers allow most Saris trunk mount carriers to be used on vehicles equipped with integrated spoilers or glass hatchbacks
- Designed for cars that require a custom fit, including those with glass-hinge lines or surfaces that are difficult for traditional trunk rack hooks to secure to, such as plastic or squared off edges.
- Hatch Huggers SL attach to your trunk rack using the existing j-hooks and straps
- Quick and easy to install and attach to your Saris Trunk Rack.
- Includes two bumpers that are compatible with existing rack straps and hooks for Saris trunk-mount bike racks.
- Maximum capacity-two bikes, 35 lb. each, 70 lbs. total.
Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).
Saris' Locking Cable 8' keeps your bike and rack where you want them: attached to your vehicle. This braided, stainless-steel cable is 8-feet long for plenty of reach. Plus, the vinyl coating protects your vehicle's and bike's finish.
Easy to move rack to/from vehicle without any lifting, this wheeled dollie attaches quickly t- most 2" receiver compatible racks
- Wheels ensure smooth and effortless transport of rack to/from vehicle without any lifting
- Connects to 2" stinger with simple pin
- Works with most Saris hitch racks and other racks that bolt t- vehicle receiver
- Easy to remove
Bike fork mounts you can put anywhere, including truck beds, minivans and SUVs
An all-in-one design that fits four thru axle spacing standards:
- 15mm x 100mm
- 15mm x 110mm
- 12mm x 100mm
- 20mm x 110mm
- Mounts directly to any flat surface for bike transport or storage
- Ultimate stability and versatility when mounted t- Saris Triple Track or Single Track (sold separately)
- Mounting hardware not included
The foundation of the Saris Modular Hitch System (MHS). Modular Base works in conjunction with MHS Bike Carriers and Accessories (sold separately) to create a versatile and dependable platform rack system for all your gear hauling needs.
- Saris Modular Hitch System (MHS) is a future-proof, highly customizable modular hitch platform system consisting of a Hitch Base and a wide assortment of Bike carriers and other gear carrying accessories.
- MHS Universal Hitch Base fits 1.25" and 2" receivers
- Base accommodates 1 bike tray + 1 Add-On Bike Tray, sold separately
- Convenient rear of vehicle access with tilting base activated with easy to use outboard handle
- Compact storage on vehicle as base tilts up when not in use
- Saris Hitch Tighter System locks and secures rack to vehicle with rock-solid hitch connection.
- Includes hitch lock plus additional 2 lock cores for use with MHS Accessories
- Fully assembled and easy to install on vehicle
An RV compatible 2" hitch base for use with any SuperClamp 2-bike hitch rack.
- Make your existing SuperClamp 2-bike hitch rack RV compatible (Class A, B, & C Motorhome).
- A 2-inch base compatible with all SuperClamp 2-bike hitch racks (4025, 4025C, 4025F, 4026F).
- For use with 2" receivers only.
- Hitch pin and hardware sold separately.
The HUSKE (HUb Standards Keep Evolving) is a universal fork mount that handles the most common fork mount standards of yesterday, today, and tomorrow. These interchangeable plugs fit into an anodized aluminum extrusion (sold separately).
Suitable for all SeaSucker fork-mount racks: Talon, Mini Bomber, Bomber, and Falcon.
Our high-end Komodo rack (rest assured, though, it works with any of our fork-mount racks) demanded some way to carry the front wheel as well, and the Hogg seemingly popped into existence. Replace your rear wheel’s axle nut with the anodized aluminum Hogg nut and then you can screw on the Hogg body when you’re ready to transport your bike. Your front wheel’s quick-release skewer clamps onto the Hogg body and off you go! Comes with an anti-rotation strap to stop your wheel from spinning pointlessly when attached. For quick-release hubs only.
If you have a trunk or rear rack and a bike with an unconventional frame (such as a full-suspension or ladies bike), you probably need Sunlite's Crossbar Adapter. Vinyl-coated hooks on either end hold your bike and act as a "top tube" for easy transportation. In the middle, a quick-release telescoping adjustment ensures the Crossbar Adapter will fit almost any bike.
- Adapts female specific and full suspension frames to be easily hung on car rack carriers
- Locking ends ensure a firm hold on the bicycles seat tube and head tube for a secure fit
- Makes transporting an unconventional frame by car rack much easier
- Extends from 21.5" to 31" eye to eye
An adapter for Thule TopRide/Thule FastRide to enable transport of bikes with 20x110mm thru-axles.
- Enables transportation of bikes with 20x110 mm thru-axle forks
The TC2 Thule Wheel Tray End Caps are compatible with the following Thule Wheel Trays: Thule 594 Sidearm, 594XT Sidearm, Thule 599XTR Big Mouth, Thule 589 Velo Vise, Thule 590 V2, Thule 590R V2 Recumbent, Thule 591 Long Tray Classic, Thule 517 Peloton, and the Thule 518 Echelon.
- Sold as a set of two
- Replacement parts for broken or lost end caps
The Thule Xadapt 3 Adapter Kit makes it possible to connect Thule carriers to Thule Professional load bars. Please contact us with any questions regarding compatibility.
An adapter to enable safe transport of bikes with carbon frames.
Features
- The fixation pressure is distributed over a large surface area to minimize risk of frame damages
- It fits all types of frame geometries and is easily adjustable with no loose parts
- The adapter has a soft TPE rubber liner to avoid scratching the bike frame
- Only to be used with Thule bike racks with a torque limiter knob (e.g. Thule ProRide 598003, Thule EasyFold, Thule DoubleTrack 9054, Thule Raceway 9003PRO)
Thule's Passive Lock Strap provides added security by locking your bicycle rack to your vehicle. Two steel cables enclosed in nylon form a strong durable strap that won’t scratch your vehicle, bike or carrier. A round puck installs securely in trunk or hatch, preventing rack removal.
The Thule Xadapt 8 Adapter Kit makes it possible to connect Thule carriers to Thule Professional load bars. Please contact us with any questions regarding compatibility.
The Thule Xadapt 9 Adapter Kit makes it possible to connect Thule carriers to Thule Rapid Aero and Thule Professional load bars. Please contact us with any questions regarding compatibility.
Two heavy-duty straps with cam-action buckles secure heavy loads while our patented buckle bumpers help to prevent vehicle scratches and dings.
- Each strap features steel cam-action buckles and protective Buckle Bumpers that fit snugly over buckles to protect vehicle and load at all times
- Packaged as a pair
- 15-foot length or 9-foot length
18" tailgate surf rack pad quickly installs to truck beds for safe and convenient transport of surfboards and stand-up paddleboards.
- Board tie-down straps sold separately
- Quick and easy installation allows for safe transport of surfboards and stand-up paddleboards in truck beds
- No-fade UV resistant fabrics deliver long term durability
- Load capacity: 1-2 surfboards
The Thule ThruRide 9mm Skewer allows the ThruRide to lock traditional forks with 9mm quick release axles to the carrier.
- Universal locking skewer with single side adjustment for easily securing bikes with traditional 9mm forks (lock included)
Secure your boat's bow and stern quickly and easily. A simple ratchet system lets you do away with bungee cords and time-consuming knots.
- Two rope ratchets with carabineer hooks for secure "peace of mind" closed loop latching to vehicle
- Two 13’ heavy-duty rope lines and 4 hardened steel hooks for transport security
- Secures to any surface
- Versatile fork mount block that secures to any flat surface and works with 9mm quick release forks and most thru thru-axle bikes.
- Fork mount bike block mounts to any flat surface including pick pick-up truck beds
- Securely transport bikes with 9mm quick release forks and thru thru-axle diameters 12x100, 12x110m, 15x100, 15x110
- Fork mount design clears disc brake calipers
An adapter for Thule ProRide to enable transport of fatbikes.
- A set of replacement wheel holders for the Thule ProRide bike carrier
- Fits wheel dimensions 3 – 5 inches to enable transport of fatbikes
Thule's Frame Adapter is an ingenious solution for carrying bicycles without standard top tubes (for example, some dual-suspension, BMX and step-through frames), on rear-mounted car racks. The Frame Adapter attaches quickly and easily and lets the rack carry your bike securely.
Install or replace all lock cylinders on your Thule products and use the same key for all.
- Replace the locks in your Thule product in a few easy steps
- Including grip-friendly Thule Comfort key
- Set of 4 locks, all using the same key
Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.
With Thule's Fat Tire Kit for T2 Racks you can finally throw your fat bike on your Thule rack (sold separately) and head for the hills. Oversize wheel trays accommodate tires up to 5-inches wide and the tray has been shaped to work perfectly with even the widest treads. An extra-long wheel strap is included to make fastening your rear wheel a breeze. This kit attaches easily to your Thule T2 hitch rack (sold separately) and includes the mounts needed for a single bike.
Provides clearance for spare tires, barn doors, and tailgates when using a hitch bike carrier.
- Two-position extension, 7" and 9", clears spare tires and allows for use of platform and hanging hitch carriers
- 250 lbs weight limit carrying capacity
- Provides a 2.25" drop for improved tailgate/rear door clearance
- Bolt fixation to vehicle
- Accommodates hitch rack bike carriers with a 2" stinger (Not for towed use)
Two 13-foot or 10-foot locking straps with One Key locking cylinders.
- Two locking straps
- Steel cables inside a theft-resistant nylon sleeve provide a dual-layer locking system
- Lightweight and corrosion resistant aluminum buckle
- Lock housing rubber-coated to prevent vehicle and equipment scratches
- Two One-Key lock cylinders included
High-grade bike lock developed with ABUS
High-quality lock for added security and protection against theft, developed with ABUS. The robust cable has a length of 150 cm and a thickness of 1,2 cm. The lock is compatible with both the two-bike and the three-bike carrier.
Maximum security
High grade bike lock with loop cable offers added security
High quality bike lock for your bikes
Developed with ABUS
Easy to install
Tool-free installation of lock to bike carrier
Install or replace all lock cylinders on your Thule products and use the same key for all.
- Replace the locks in your Thule product in a few easy steps
- Including grip-friendly Thule Comfort key
- Set of 6 locks, all using the same key