Parts & Accessories
Body Geometry Footbeds are ergonomically designed and scientifically tested to increase power, endurance, and comfort by optimizing hip, knee, and foot alignment. With three different arch support options (Red+ being the lowest, Blue++ being in the middle, and Green+++ being tallest), you can be sure that every precious watt is preserved through the pedal stroke. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.
- Stretch waterproof PU fabric with taped center front seam - Extensive 360-degree reflective trim on front, side, and rear - Flatlocked seams for additional durability - Opens fully at sole and up back heel with Velcro fastening for an adjustable fit - Stretch aramid abrasion resistant sole and toe - Suitable for all kinds of footwear and cleats
Protect your little piggies With the Windshell Toe Cover, your feet retain an extra dose of warmth thanks to windshell material that is windproof and water-resistant no matter if riding on the road or mountains. - Windshell material provides insulation and protection during windy and wet riding - Integrated pull tabs for easy on and off - Designed for use with road or mountain shoes for maximum versatility - Soft elastic band above ankle for added coverage and comfort Specifications - Temperature use (high): 70 deg. F - Temperature use (low): 50 deg. F - Fiber content: 78% Rubber / 15% Nylon / 7% Polyester - Material: Woven - Sole Construction: Closed with holes for clips
Proper alignment starts here Bontrager inForm BioDynamic insoles with Superfeet are engineered to harmonize the interface between body, shoe, and bike, giving you the complete foot support you need to ensure mile after mile of pain-free pedaling. Models are color-coded: - Red = Low Arch - Yellow = Mid Arch - Blue = High Arch - Engineered for unparalleled foot control, pedaling efficiency, and comfort - 3D Arch Pillar provides optimal arch support for improved knee alignment - Precision molded heel cup helps stabilize and align the foot - Footrest metatarsal pad helps reduce or eliminate hot foot - inForm BioDynamics—Optimizes natural movement for sustained, higher performance
$17.59 - $21.99 $21.99 20% Off
96% Nylon, 4% Lycra The original DeFeet shoe cover is designed to be worn over road cycling shoes with cleat systems, providing an extra barrier against windchill and dirt. A three-season product for cool to cold conditions in damp or dry weather, Slipstreams feature a knit-in cleat guide to cut your own opening.
Replacement SL and SL2 shoe buckles, sold in pairs. - Sold in pairs - SL buckles for 2012 and prior shoes - SL2 buckles for 2013 and newer shoes - Low-profile - Replaces without tools
Depending on where you live and ride, full shoe covers might be a little too aggressive for the conditions at hand. That isn't to say that it isn't cold, though—you just might be better suited with something like Specialized Element Windstopper Toe Covers, instead. These toe covers feature a Gore Windstopper Soft Shell construction that ensures superior levels of breathable insulation, plus reliable resistance to both wind and water. The result? Warmth and protection right where you need it, without running the risk of overheating. - Gore Windstopper Soft Shell provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means that the covers are compatible with both road and mountain shoes. - Reflective elements increase your visibility to motorists in low-light conditions. - Small/Medium: sizes 38 – 43 - Large/X-Large: sizes 44 – 48
Tecno 3 Push Button Release Tensioner from Sidi. Short designed for Trace, Alba, Ergo and Dragon.
$34.95 $70.00 50% Off
For some serious protection in the cold and wet for your toes, slip on a pair of the Neoprene Shoe Covers—they're the perfect winter accessory to ensure your feet stay warm and dry. - Rear opening with zippers securely blocks the elements from infiltrating the covers, while also easing entry and exit. - Abrasion resistant toe and heel sole utilizes universal welted velcro closure, so these covers are compatible with both road and mountain shoes. - Fabric Content: 100% Neoprene
Having a go-to wardrobe that can deal with the worst weather is key when you have to get out and ride in all seasons. Keeping your feet warm and dry will make your commute or foul weather ride easier and more comfortable. - Open soles framed by abrasion resistant material - Ideal to wear with cycling and leisure shoes - Lightweight material for easy storage - GORE-TEX Product: durably waterproof, windproof and extremely breathable - Reflective details at front, back and side - Reflective transfer print to mark right and left - Back Velcro width adjustment
Ideal for the cold season: Extremely lightweight GORE WINDSTOPPER overshoes keep your feet wonderfully warm. They fit snugly on shoes for a close fit. A zipper on the back makes for easy off and on. - Soft and versatile GORE WINDSTOPPER Product: windproof, water repellent and highly breathable - Elastic back for maximum comfort and fit - Reflective logo and piping - Zipper closure
For top comfort, Planet Bike's Blitzen Shoe Covers are made of windproof fabric lined with microfleece to keep you warm. They boast Velcro closures for easy on/off and reflective accents for safety.
Moisture management is one of the most important elements of winter cycling and can make or break a ride. On long rides in extreme conditions, having a spare pair of 45NRTH's Wølfgar boot liners means you can ride confidently knowing that you have a dry, fresh pair when you need it. Constructed with a wool/polyester blend for durability, Wølfgar's liner boot wicks moisture away from your skin while still maintaining its insulation value to keep your feet dry and comfortable. Hook-and-loop on the heel secures the liner inside the shell boot. For use with 45NRTH Wølfgar boots only (sold separately)
- Wind-resistant/water-resistant - Insulation for warmth - Reflective logo
Planet Bike's Comet Shoe Covers are made of neoprene for excellent water and wind resistance and warmth. Plus they have Velcro closures for easy on/off and reflective accents for safety.
Rugged Protection For Dirty Days On Your Mountain Bike Endura was among the first to employ neoprene in bike overshoes. A core stalwart of our collection, the MT500 Overshoe has been a best-seller for many years. Here in Scotland, we know a thing or two about foul weather gear, and this latest evolution of our waterproof durable mountain bike overshoe is the result of years of testing in the worst possible conditions. Endura’s unique molded rubber toe cap with a treaded underside provides grip when climbing steep and muddy slopes. The stand-out feature of Endura's MT500 Overshoe, and the one that sets it apart from the rest of the competition, is the molded rubber toe cap. This has been totally revamped with improved tread on the underside that gives you plenty of grip on steep, muddy slopes and also includes additional reinforced areas that improve the durability of the overshoe. Neoprene is the perfect material to construct overshoes from. Not only does it provide water and wind protection but it also adds an insulating layer over your foot. This keeps your circulation going allowing you to ride for longer in comfort, whatever the weather. - Tough nylon-faced neoprene upper - Offset rear zip with snap-down puller and zip guard - Molded rubber toe cap with treaded underside to help climb steep muddy slopes - Asymmetric front seam for improved fit - Hard-wearing reinforced sole protects the bottom of the overshoe from rocks and pedals - Crank-rub protection - Reflective detailing - Suitable for MTB cleats only - 90-day Satisfaction Guarantee
Need to replace your buckle? Bont's Slimline Buckle Kit includes a pair of buckles, loop, a pair of 9cm ladders, and screws. Just grab a small screwdriver and you can easily replace your current buckles. Please note that you can only replace the buckle on your shoe with the same buckle kit that the shoe came with. You cannot replace a Slimline buckle with a Standard buckle.
The fi'zi:k toe cover's light, comfortable, water resistant PU-cloth upper is mated to a hard-wearing, waterproof reinforced PU fabric sole. With its Microfiber toe cap and puller and this elastic binding it's comfortable, easy fitting and doesn't interfere with your cleats. A reflective fi'zi:k logo aids visibility and a range of sizes are available to suit all riders. Specifications - Windproof and Water Resistant upper (PU, Nylon & Polyester) - Reinforced PU fabric sole, Toe Cap & Puller - Thin elastic binding - Reflective fi'zi:k logo - Color: Black Sizes - X-Small/Small: Sizes 36-40 - Medium/Large: Sizes 41-44 - X-Large/XX-Large: Sizes 45-48
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.
Mother Nature is always in flux, but mankind is both smart and adaptable. In other words, whenever she changes her mood, we always have the right tool for the job. And when that job is protecting against blustery, cold conditions, the right tool is our Deflect Comp Shoe Covers. Compared to our Element line of shoe covers, Deflect places more of a focus on wind resistance, so you'll find a stretchable construction with lightweight insulating properties. And to make getting in and out of the covers easy, we also included a rear zipper. - Deflect fabrics feature a good amount of stretch and a brushed back interior to ensure a light level of insulation. - Abrasion-resistant bottom and toe panels increase the lifespan. - A universal cleat opening makes these covers compatible with either road or mountain shoes. - Reflective elements - Rear Velcro closure
The Pro in the Diluvio Pro name indicates that this product comes from a request from Team Ineos riders for an even warmer bootie for training in cold and wet conditions. We made the neoprene 33% thicker and raised the height to cover the lower leg up to just under the calf muscle. The top edge is raw cut to help seal against the skin to keep water out, the seams are sealed like on a wet suit, and the fabric remains very stretchy for great fit and ease in pulling on. - 4mm neoprene fabric will stand up to the wettest and coldest winter riding conditions - Seams are glued and stitched for added protection from the rain - Water-resistant YKK zipper at back - Pro fit with added height to cover your 20cm socks - Reflective heel and side print for safety
If you've never experienced the pain of riding with ice blocks for feet, consider yourself lucky. For the rest of us, however, it's a feeling that we'd be happy to never experience again. But without pieces like our Neoprene Toe Covers, history is doomed to repeat itself this winter. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means that the covers are compatible with both road and mountain shoes. - Fabric Content: 100% Neoprene
Extend your cycling season Round out your cycling wardrobe with one of our most popular autumn road products. The S1 Softshell Shoe Cover keeps you warm, dry, and protected in rainy or dry conditions above freezing. Key features - Choose the right gear for your climate—S1 for above freezing, S2 for below - Profila Softshell fabric for water resistance and windproof protection in cold and wet conditions - Visibility colorway uses biomotion to help improve daytime detectability - YKK zipper for easy on/off - Designed for use with road or mountain shoes for maximum versatility - Reflective elements enhance visibility during nighttime riding
DO-IT-ALL DILUVIO We've taken our best-selling Diluvio C and Diluvio Allroad booties and modified, improved, and combined them into the all-new Diluvio UL. With improved fit and a better seal thanks to the neoprene enclosure at the top, large reflective rear tabs for visibility, and the flexibility to accommodate any type of cycling shoe, there's little this bootie can't handle. - 3mm neoprene for water protection and warmth - Velcro closure underfoot for the perfect fit - Bottom opening accommodates road, gravel or MTB shoes - Sealed seams - YKK zipper - Neoprene skins at cuff to keep water out
Whether you’re preparing to hit the road or trail, the AmFIB® Lite shoe cover is the right choice to keep your feet warm and dry. The three-layer softshell fabric blocks the wind and sheds moisture while remaining highly breathable. A high cuff designed to overlap with tights ensures a comfortable seal, and BioViz® reflective elements on the toe, side, and heel increase low-light visibility. FEATURES: - Compatible with road and mountain bike shoes - Three-layer softshell fabric is windproof and water-resistant - Zippered closure for installation and removal - BioViz® reflective elements increase low-light visibility FABRIC: - 43% polyamide, 29% polyester, 28% polyurethane
The REFLECT360 overshoes offers exceptional waterproofing and all over reflectivity for commuters and night riders. Utilizing our REFLECT360 technology, the material reflects vehicle headlights so they light up to be bright white to help your position on the road be more easily identifiable. They have a waterproof lock-zipper, reinforced toe and heel, calf hook and loop adjustment and an open sole for your cleats. All in all, everything you'd want in a top quality waterproof shoe cover. - 100% REFLECT360 reflective material - Protective mesh covering the reflective paneling - Designed to be worn only with cycling shoes that have cleats - Waterproof and windproof PU coated fleece - Offset waterproof lock-zipper, calf hook & loop adjustor and open sole - Reinforced toe and heel - Designed to be worn with cycling shoes - not trainers or other shoes
Born out of necessity during wet and muddy Midwest gravel races, our Gravel Gaiter keeps mud, sand and gravel out of your shoes. We took inspiration from the scree gaiters used by trail runners to develop a cycling-specific version that provides maximum breathability and durability so you can ride through the worst conditions. A locking zipper keeps the Gravel Gaiter securely in place and the Hypalon midfoot strap won't get in the way during treacherous hike-a-bike sections.
Reach for this shoe cover on those cold days when you're not taking no for an answer. This is our very warmest shoe cover, thanks to three-layer AmFIB softshell fabric and a quilted lining with 100g Primaloft Gold with Crosscore technology. Plus, a durable water-repellent (DWR) finish keeps your feet dry through most conditions. Our anatomic design eliminates the bunching that can happen near the top of the pedal stroke, and the patented two-stage hook-and-loop closure makes them easy to put on and take off, solving one of the most frustrating parts of using shoe covers. - AmFIB Softshell provides superior wind and water protection - 100g Primaloft Gold w/Crosscore technology insulation is made from 35% post-consumer recycled polyester and incorporates Aerogel particles for incredible warmth with minimal weight - Patented two-stage hook-and-loop closure provides both sleek fit and easy on and off - Anatomic paneling for a performance fit - BioViz reflective elements for low-light visibility - Main Body: 37% polyurethane, 33% polyester, 20% polyamide, 10% CORDURA - Lining: 100% polyamide - Made in Vietnam
This shoe cover is as committed as you are to riding through the wettest weather, thanks to three-layer waterproof/breathable fabric that blocks wind and stops rain in its tracks. The WRX Shoe cover works with both road and mountain bike shoes and can be used with standard footwear as well. (We suggest sizing up for flat pedal and street shoes). A two-stage hook and loop closure makes it easy to pull these on and keeps the elements at bay. BioViz® reflective elements on the toe, side, and heel increase low-light visibility. FEATURES: - Made with recycled materials - Compatible with road, mountain, and standard shoes - We suggest sizing up for mountain bike or street shoes - Three-layer waterproof breathable fabric blocks wind and water - Two-stage hook and loop closures for installation and removal - BioViz® reflective elements increase low-light visibility FABRIC: - 87% polyester, 13% nylon
If you've never experienced the pain of riding with ice blocks for feet, consider yourself lucky. For the rest of us, however, it's a feeling that we'd be happy to never experience again. But without pieces like our Element Toe Covers, history is doomed to repeat itself this winter. Soft Shell fabrics are synonymous with unrivaled protection and quality and this is for a good reason. It provides amazing levels of wind and water resistance, without sacrificing anything to breathability. This means that your toes are going to stay warm and protected, not wet and clammy. And with abrasion resistance at key points of the construction, you'll be receiving these warming advantages for seasons to come. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Fabric Content: Knit 44% Polyester, 38% Nylon, 14% Elastane, 4% PU. - Soft Shell fabric provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Universal cleat opening means that the covers are compatible with both road and mountain shoes.
Page 1 of 3 Next page