Cycling Shoes

From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care. - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - 280g for a size 156

The 2FO Method melds unmatched pedal grip of our SlipNot™ compound with the stealthy style of a canvas upper and low-profile cut. With the SlipNot sole that propels riders like Loïc Bruni and Finn Iles to World Cup DH podiums, this casually stylish shoe can pull full-spectrum rowdiness from trail sessions to pump track to jump line to hanging out off the bike. - UNMATCHED GRIP: SlipNot™ rubber outsole offers unmatched traction, grip, and pedal feel. - STYLE & FEEL: Canvas upper sits into a cup sole for a lower profile and better pedal feel. - COMFORT: canvas upper offers ruggedness and breathability. - PADDED PERFORMANCE: Foam core midsole for vibration damping and cushioning. - STEALTHY SUPPORT: Internal heel counter adds support without bulk. - BODY GEOMETRY: Sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.

The 2FO Method melds unmatched pedal grip of our SlipNot™ compound with the stealthy style of a canvas upper and low-profile cut. With the SlipNot sole that propels riders like Loïc Bruni and Finn Iles to World Cup DH podiums, this casually stylish shoe can pull full-spectrum rowdiness from trail sessions to pump track to jump line to hanging out off the bike. - UNMATCHED GRIP: SlipNot™ rubber outsole offers unmatched traction, grip, and pedal feel. - STYLE & FEEL: Canvas upper sits into a cup sole for a lower profile and better pedal feel. - COMFORT: canvas upper offers ruggedness and breathability. - PADDED PERFORMANCE: Foam core midsole for vibration damping and cushioning. - STEALTHY SUPPORT: Internal heel counter adds support without bulk. - BODY GEOMETRY: Sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.

Built for high-alpine terrain, the Rime 2.0 brings rugged capability to ensure you can conquer any mountain trail. XPEL mesh lining sheds while you shred, preventing the shoe from becoming water-logged in creek crossings and will dry overnight. Our Lollipop midsole construction is paired with a gnarly Vibram rubber outsole creating superb/unmatched off-bike push-ability for getting over any unrideable terrain. For closure, a standard lace is paired with a L6 Boa® for precise fit, on-bike adjustability, and redundancy to keep you riding when you're in the backcountry. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - X-PEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Upper is treated with DWR for water repellency and easy cleaning. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Boa L6 dials for easy adjustment, backed by the Boa Lifetime Guarantee. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Vibram™ rubber sole for confident traction. - Cushioned EVA foam midsole for comfort with molded heel cup for stability. - Relaxed Fit last for a balance of pedal feel and off-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 384g (1/2 pair, size 42)

Mountain Biker, Climber, Guide, Explorer. For those who ride and hike, hike and ride, or simply find themselves going off trail, we created the Rime Flat. An approach shoe for the dedicated trail rider, designed to have just as much performance when hiking as it does when riding. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Welded mesh and TPU upper eliminates seams and is engineered for durability. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Cushioned EVA foam midsole for comfort and impact absorption with shank layer for impact absorption and stability. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. Approximate weight: 386.5 grams.

The 2FO DH Clip is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot FG rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Extended length cleat slot (4mm) for rearward cleat set up option. - Synthetic leather upper with added protection keeps you comfortable and is built to last. - Cushioned EVA foam midsole for comfort. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 395.9 grams

When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced toungless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features-Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

STYLISH AND VERSATILE WOMEN'S XC SHOES DELIVER HIGH PERFORMANCE TO MORE RIDERS. FEATURES - Lightweight SHIMANO ULTREAD XC rubber outsole delivers competition-grade grip that lasts. - Mesh/TPU and Synthetic leather material covered upper in optimized part to provides comfortable fit and light weight. - BOA® L6 dial on instep strap quickly and comfortably secures a wide range of foot shapes. - Glass fiber reinforced midsole for power transfer. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Women’s specific last for a natural, comfortable fit. - Rider-tunable spikes allow riders to select and swap spikes to match riding styles and conditions. - Low stack height midsole helps stabilize foot, maximizes power transfer and efficiency.

LIGHTWEIGHT ROAD PERFORMANCE SHOES WITH S-PHYRE DNA. FEATURES - Mesh/TPU and Synthetic leather material covered upper in optimized part to provides comfortable fit and light weight. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - BOA® L6 dial on instep strap quickly and comfortably secures a wide range of foot shapes. - Carbon fiber reinforced nylon midsole for power transfer. - Low stack height midsole stabilizes foot and maximizes power transfer efficiency.

You owe it to yourself Get the road shoe that checks all the boxes for the committed female road cyclist. Velocis is designed for the road bike rider that needs one pair of cycling shoes to give them more of what they want. The Boa System provides a perfect fit that locks in power through every pedal stroke. If you're not careful, sponsors may come calling. - inForm Pro last delivers an ergonomically optimized, high-performance fit - Silver Series carbon/fiberglass composite sole for added stiffness - Boa IP1 dial for precise, two-way adjustment - Stiffness index 10 of 14 - Perforated synthetic uppers allow increased breathability and comfort - Women Specific Design is engineered specifically to yield better fit and greater comfort for women

Lightweight, high-performance mid-range XC shoe. Synthetic Leather Lighter, stronger and more durable than natural leathers Reinforced Spike Mount Reinforced spike mount for extreme conditions - Low stack height midsole helps stabilize foot, maximizing power transfer and efficiency - Surround wrapping upper structure reduces overlap, providing a glove-like fit - Mesh/TPU/Synthetic leather composite upper provides a comfortable fit and better breathability - Boa L6 dial for quick and precise micro-adjustment - Glass fiber reinforced midsole for power transfer - Exclusive MICHELIN high-traction, mud-shedding tread pattern outsole - Reinforced spike mount for extreme conditions, 18mm spike option

If you're on the hunt for a capable, tough, and versatile pair of mountain biking shoes, look no further than the Rime 1.0. They feature a host of Body Geometry hallmarks that you'll find in all of our shoes, plus sweet tech like an X-PEL water management system that reduces water absorption while drastically improving dry time. And, to round out the package, we included a SlipNot Rubber outsole, a Lollipop midsole, and a relaxed fit that balances pedal feel and off-the-bike comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - X-PEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Laces and Hook-and-loop overstrap provide a comfortable with one-hand adjustability - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - SlipNot rubber sole for confident traction. - Cushioned EVA foam midsole for comfort with molded heel cup for stability. - Relaxed Fit for a balance of pedal feel and off-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals.

Get the road shoe that checks all the boxes for the committed road cyclist. Velocis is designed for the road bike rider that needs one pair of cycling shoes to give them more of what they want. The Boa System provides a perfect fit that locks in power through every pedal stroke. If you're not careful, sponsors may come calling. Key features - inForm Pro last delivers an ergonomically optimized, high-performance fit - Silver Series carbon/fiberglass composite sole for added stiffness - Boa IP1 dial for precise, two-way adjustment - Stiffness index 10 of 14 - Perforated synthetic uppers allow increased breathability and comfort - Sole Fiber Content: Carbon Composite - Liner Fiber Content: Shell: 100% Polyester, Lining: 100% Polyester

High-performance XC MTB racing shoe with advanced fit and pedaling technologies. FEATURES - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Off-set center flap mounted BOA L6 dial creates a sleeker profile with quick adjustments. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Rubber XC racing pattern outsole promotes stable pedal engagement and secure walking grip. - Low stack height midsole stabilizes foot and maximizes power transfer efficiency. - Perforated synthetic leather composite upper enables superior fit and breathability. - Lightweight glass fiber reinforced nylon sole for power transfer.

Women's performance indoor SPD cycling shoes with a comfortable fit and maximum breathability. - Breathable, comfortable sock mesh upper designed for hard workouts - Easily open, tighten, and adjust fit with Boa L6 dial - Full-length reinforced plate provides stable power transfer - Full-length rubber sole enhances walking comfort - Women's specific performance DYNALAST for a natural, comfortable fit

Just because winning an XC World Cup isn’t on your to-do list, doesn’t mean you don’t value performance and comfort. Recon 2.0 is your shoe. Inspired by S-Works Recon, with Body Geometry comfort and efficiency, Recon 2.0 puts all that performance within easy reach. Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in the saddle performance. We’ve also lifted the heel for an even more natural feeling while walking. To create traction off the bike in wet or dry, gravel or dirt, we’ve covered the nylon outsole with our SlipNot compound. If the traction's needed in the wet, you can also rest easy knowing the XPEL mesh used through the Recon 2.0 won’t get bogged down with water and will dry exceptionally quickly. No more wet shoes the morning after a wet ride. An L6-Snap Boa and a Velcro forefoot closure ensure micro-adjustable comfort with a secure fit designed for all-day comfort and performance, whether your ride calls for open gravel, twisting single track, and even more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness index 6.0 - Welded upper reduces seams for superior step-in comfort. - BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 357g (1/2 pair, Size 42)

There is nothing like canvas to keep you cool during hot laps or at the post-ride hang spot. The 2FO Roost Canvas combines a durable canvas upper, cushioned EVA foam midsole, and relaxed fit to create a shoe that won't lose its cool. And our SlipNot ST rubber sole delivers unsurpassed flat-pedal grip and connection to keep you in control through the heaviest rock gardens, making the 2FO Roost Canvas a great pair of kicks with ridiculous trail performance and off-bike comfort and style. Paint Your Trail - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - SlipNot™ ST rubber sole for unsurpassed flat-pedal grip and connection. - Canvas and textile upper with added protection keeps you comfortable and is built to last. - Cushioned EVA foam midsole for comfort and impact absorption. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Approximate weight: 360g (1/2 pair, Size 42)

If you're looking for a versatile MTB shoe that can transition from hot laps in the park to cold beers at the base without missing a step, then look no further. The 2FO Roost Clip brings a casual, relaxed vibe with all the right DNA to get sendy on the bike. It combines a durable leather and textile upper, cushioned EVA foam midsole and relaxed fit last that can stand up to the rigors of daily trail use without sacrificing off-the-bike comfort and style. Last but not least, a SlipNot FG rubber sole delivers confident traction on and off the trail. - Approximate weight: 367g (1/2 pair, Size 42). - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Cushioned EVA foam midsole for comfort. - Extended length cleat slot (4mm) for rearward cleat set up option. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Synthetic leather upper conforms to the foot and is built to last. - Two-bolt cleat pattern fits all major mountain pedals.

SH-AM501 SPD shoe features performance, protection, comfort, and style for gravity riders. - Durable synthetic upper with mesh for protection and breathability - High-grip rubber sole with toe and heal traction tread improve walking - Pedal channel for stable shoe to pedal platform when not clipped in - Single strap secures and protects your laces - Includes one pair of alternative color spare laces

High-performance XC MTB racing shoe with advanced fit and pedaling technologies. FEATURES - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Off-set center flap mounted BOA L6 dial creates a sleeker profile with quick adjustments. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Rubber XC racing pattern outsole promotes stable pedal engagement and secure walking grip. - Low stack height midsole stabilizes foot and maximizes power transfer efficiency. - Perforated synthetic leather composite upper enables superior fit and breathability. - Lightweight glass fiber reinforced nylon sole for power transfer.

Just because winning an XC World Cup isn't on your to-do list, doesn't mean you don't value performance and comfort. Recon 2.0 is your shoe. Inspired by S-Works Recon, with Body Geometry comfort and efficiency, Recon 2.0 puts all that performance within easy reach. Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU-injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. We've also lifted the heel for an even more natural feeling while walking. To create traction off the bike in wet or dry, gravel or dirt, we've covered the nylon outsole with our SlipNot compound. If the traction's needed in the wet, you can also rest easy knowing the XPEL mesh used through the Recon 2.0 won't get bogged down with water and will dry exceptionally quickly. No more wet shoes the morning after a wet ride. An L6-Snap Boa and a Velcro forefoot closure ensure micro-adjustable comfort with a secure fit designed for all-day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness index 6.0 - Welded upper reduces seams for superior step-in comfort. - BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 357g (1/2 pair, Size 42)

Mountain: Biker, Climber, Guide, Explorer. For those who ride and hike, hike and ride, or simply find themselves going off trail, we created the Rime Flat. An approach shoe for the dedicated trail rider designed to have just as much performance when hiking as it does when riding. The proprietary SlipNot SuperTacky rubber sole was developed to strike a perfect balance of pedal grip and trail kick. To aid in climbing steep and loose trails, we've built in a flexible toe section that makes it easier to kick into the terrain, giving you a leg up when you hike up. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency; optimize hip, knee, and foot alignment; and reduce injury risks. - Welded mesh and TPU upper eliminates seams and is engineered for durability. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Cushioned EVA foam midsole for comfort and impact absorption with shank layer for impact absorption and stability. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Approximate weight: 386.5 grams

KOM/QOM chasers, race podium challengers, and all devotees of speed don’t need to sacrifice comfort, durability, or off-the-bike capability when searching for an efficient race-ready shoe with the scientifically proven performance benefits of Body Geometry. A shoe that looks good, feels good, and is light yet capable can be hard to find—well, it used to be. Meet the all-new Recon 3.0, a not-so-distant relative to its S-Works counterpart: made for speed, durability, comfort, and now lighter than ever before. Body Geometry: Like every Body Geometry shoe, the Recon 3.0 is ergonomically designed and scientifically proven to improve comfort, increase performance, and reduce the chance of injury for every rider with patented technology, while improving power by 7 watts - validated by science. Stride Technology: Stride technology provides a flexible outsole and upper around the toe box combined with a stiff cleat pocket, enabling the shoe to easily flex when walking and remain stiff and efficient when pedaling. High Performance & Efficiency: The Recon 3.0 pulls its cable routing, Boa dial placement, and carbon plate directly from our halo S-Works Recon. Dual, premium Li2 Boa Dials offer optimized adjustability and fit, while the cable routing ensures a locked-in feel, minimizing movement within the shoe. The carbon plate keeps the Recon 3.0 lightweight and stiff for optimal power output on the pedal, not to mention shaving 10 grams off our previous generation. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Carbon STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness Index 10.0) - Fully-welded upper reduces seams for superior step-in comfort. - Independent BOA® Li2 dials for on-the-fly micro-adjustment. - SlipNot™ rubber tread for confident traction on all terrain with removable toe studs. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 345g (1/2 pair, Size 42)

The Recon 3.0 is all about putting the legendary performance of our S-Works Recon - power transfer, comfort, light weight, style - in a package perfect for the XC and gravel rider. Starting with Body Geometry, Recon 3.0 delivers comfort and efficiency, with features that stand-out off the beaten path. Looking for in the saddle speed as well as off-bike performance? Recon 3.0 mates a carbon outsole with a Pave-inspired glass fiber forefoot to create Carbon STRIDE toe-flex, which lets your foot function naturally off the bike, yet still provides incredible power transfer with a stiffness index of 10.0. Whether you're flying up a run-up on the 'cross course or strolling into the brewhouse post ride, STRIDE toe-flex is a game changer. We know venturing off-road means venturing into the unknown, so we've given the Recon 3.0 XPEL Mesh to create a comfortable fit that sheds water, keeping the shoe light and making it dry as fast as it rides. Our SlipNot compound provides full rubber coverage of the outsole for off bike traction on any surface, with open treads to eject mud. Dual L6-Snap Boas and a Velcro forefoot closure ensure micro adjustable comfort with a secure fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Carbon STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness Index 10.0) - Fully-welded upper reduces seams for superior step-in comfort. - Independent BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain with removable toe studs. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 355g (1/2 pair, Size 42)

When the moment comes for an attack in the hills, a long solo move, or a full-gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, fewer injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

Road cycling shoe with race-inspired style and features. Features: - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Synthetic leather with mesh texture creates a comfortable fit and an exciting racing profile. - Three durable hook & loop straps evenly spread tightening force across the top of the foot. - Lightweight glass fiber-reinforced nylon sole for power transfer. - Durable, wide heel pads provide walking stability. - Offset strap relieves tension at highest point of the foot.

The all-new S-Works Torch Lace delivers the timeless, refined style of a lace-up with an unprecedented level of efficiency, lightweight, and comfort thanks to Body Geometry. It all adds up to a shoe that disappears on your foot, yet begs to be seen. Like every shoe we make, the S-Works Torch Lace starts with Body Geometry - identify a problem, solve it with design, and validate it with science - to improve comfort, increase performance, and reduce the chance of injury for every rider. Comfort: The S-Works Torch Lace utilizes our new forefoot shape - 4mm wider than the S-Works 7 - based on extensive 3D foot scans and Retül data. The upper features remapped zonal layering throughout. It remains incredibly supple to adapt to different foot shapes, yet won’t stretch over a long day in the saddle to ensure a secure, consistent fit. An asymmetric heel counter reduces hard touch points against the ankle and still delivers knee stability validated by our Human Performance team. Efficiency: Every Body Geometry shoe optimizes ankle, knee, and hip alignment for a stable and pedal stroke with our patented Varus Wedge, a 1.5mm outward tilt to the outsole. Thanks to the lightweight retention of laces and watching every gram - from the carbon outsole to the upper material - the S-Works Torch Lace weighs a feathery 200 grams in size 42. With an internal ‘I-Beam’ the carbon outsole provides the ideal stiffness-to-weight ratio for big efforts without adding excess grams, optimized by working with the best riders in the world. Style: Beauty is in the eye of the beholder, and those that see the S-Works Torch Lace will get to admire them as long as they can hang on your wheel. With classic lines and understated colorways the S-Works Torch Lace is at home whether you chase finish lines or mountain tops before sunset. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Laced closure maintains the most opportunity to customize fit along the entire foot. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - Approximate weight: 200g (1/2 pair, Size 42).

The all-new Union Flat Shoes are set to take your mountain bike adventures to new and sendier levels of "yew!" The flat-pedal version of the Union mountain bike shoes sticks confidently to your platform pedals and should you come into a corner with too much pepper, let you easily stick a foot out and steady the ship. Built with robust features including a molded cap design to protect against rock strikes, the Union Flat shoes handles the rigors of trail abuse with ease. With a lightweight and precise fit, the low-profile, custom-tuned EVA midsole ratchets up your pedal grip and feel, giving you more comfort while you shred. Power to the pedal is optimized care of the molded internal stiffening plate, but it's not stiffness at the expense of off-bike comfort. Should you have to hike-a-bike around that downed tree, you're all good. The sole is designed using the Ultratac™ rubber compound, with the engineered tread pattern providing best-in-class grip and durability. Versatile and with understated style, Union Flat MTB Shoes were born to rip, transitioning from sweet single track to your post-ride tailgate brews with ease. - Flat pedal mountain bike shoes - Ultratac™ outsole balances grip and durability - Custom hex shaped lugs engage with flat pedal - Reinforced toe for protection against rock strikes

Unlock your true potential and push your performance to the next level with Bontrager's Circuit Road Cycling Shoe. It's equal parts stiff and comfortable, making it the perfect choice for riders who want to tackle a variety of road rides without making their feet pay for it. Compatible with two-bolt SPD-style and three-bolt cleats. - inForm Race last offers a slightly roomier, high-performance fit - A single BOA L6 dial for precision fit and easy micro-adjustments - Hook-and-loop toe strap allows adjustments for a better and more comfortable fit - Perforations on synthetic mesh and TPU uppers provide superior breathability - Nylon composite Bronze Series sole - Stiffness index: 7 of 14 - Compatible with 3-bolt and 2-bolt (SPD-style) cleats (2-bolt mounting plate sold separately)

High-performance XC MTB racing shoe with advanced fit and pedaling technologies. FEATURES - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Off-set center flap mounted BOA L6 dial creates a sleeker profile with quick adjustments. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Rubber XC racing pattern outsole promotes stable pedal engagement and secure walking grip. - Low stack height midsole stabilizes foot and maximizes power transfer efficiency. - Perforated synthetic leather composite upper enables superior fit and breathability. - Lightweight glass fiber reinforced nylon sole for power transfer.