29-Inch

When tracks get really, really rocky and the roots are thicker than your legs, it is time to choose a wheel like the E 1700 SPLINE 30. Paired to a 2.5-inch tire you end up with an enormous amount of grip, allowing you to attack even the nastiest sections quite relaxed. The wheel build with double butted Competition spokes in their strongest straight pull edition is based on DT's reliable and lightweight Ratchet System hubs. A combination just right for Enduro use: strong enough to go through anything, light enough to get there.

Just wide enough, just light enough. At 30mm internal rim width the M 1700 SPLINE 30 works for tires ranging from slightly wide to quite wide, allowing it to attack the hardest terrain. But with a high-end build, butted spokes, patented alloy Pro Lock nipples and the benchmark Ratchet System hubs, it still comes in at a low weight. Low weight means it's very reactive to rider input. Reactive means fun, and fun is why we are all doing this, right?

It's a fact: On an E-MTB you run into trail sections much faster than you have ever before considered possible. The H 1700 SPLINE 30 has the power to get you out of such situations as a winner and not face down in the dirt. Steering precision is covered by the strong spokes and the trademark DT Swiss wheel build with high and even spoke tension. The rim can take tires suited for fast riding on rugged terrain and supports them perfectly, even at low pressures. Reliable Ratchet System hubs finally make sure that you can come back and attack those gnarly sections of trail time and time again.

Responding to the demand from top racers for even wider rims, DT have developed an XC-specific 25mm-wide rim profile. This is what's built into the XR 1501 SPLINE ONE 25. The result is a super capable, super light Cross Country wheel. It feels perfectly at home on the trails that have become tougher and rougher both up and down the mountain. And built with DT Swiss quality in every detail, from the hub internals to the spoke nipple, it makes sure you complete all the laps, weekend after weekend.

The XMC 1200 SPLINE is for anyone who enjoys high-speed climbing and descending. Fit with tubeless tires, the full carbon hookless rim massively reduces the chance of punctures, is super-light, and at 30mm rim width, works to perfection with wide all mountain rubber. The SPLINE hub is the lightest wheel hub ever built by DT Swiss, together with the bladed top end spokes and a perfect DT Swiss wheel build, it complements the carbon rim for the ultimate trail bike wheel set.

The XM 1501 SPLINE ONE 30: a whole lot of wheel. Fit with high volume tires it will eat up the roughest of descents you can throw at it, and it will climb to those trailheads with ease. Really the perfect size for demanding all mountain riders, it features DT's famous aluminum rim construction, proven on World Cup downhill and EWS levels. The DT Swiss wheel build quality and the unmatched Ratchet System hubs complement this extremely capable package, made to dominate the mountain.

The new Stout XC SL 29 front wheel includes a strong, double-wall alloy rim, stainless steel spokes, brass nipples, and a reliable Shimano Center Lock hub. Charcoal decals complete the look, making this a perfect OE replacement or XC-ready upgrade. - Lightweight and reliable Shimano hub. - Double-wall, disc-specific rim is strong and durable. - Brass nipples hold spoke tension securely and resist rust for added durability. - Stainless spokes won't rust, easing long-term maintenance.

The trails in our neck of the woods get pretty hairy pretty fast, so we've found them to be the perfect testing ground for fast and tough wheels like our Traverse 29 Carbon. The steep climbs and descents helped inspire some pretty radical designs, and most importantly, left us with no doubt that these wheels will exceed your expectations. Let's talk about those expectations. They include everything from the ability to stay true after launching off drops to being light enough to efficiently pedal to the top of a climb, and they all begin with the rim. Our engineers knew they wanted carbon fiber, and with the inclusion of our Zero Bead Hook design, they were able to implement a continuous fiber layup across the sidewall and rim bed. And when paired with a whopping 30-millimeter internal rim width, they made a wheel that's super resilient to impact with low rolling resistance and incredible traction. You'll also find that it helps prevent "burping" during hard cornering, while also making tubeless set up quick and easy. Along with light overall weight, stiffness, and durability, another top priority for the Traverse was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for front and rear wheels, that are all the same length, making it easy to find replacements if needed. And finally, we engineered a new hub design with a wider profile and higher flange to aid in overall stiffness. A wider rim does a variety of things for ride performance, better supports the tire for increased confidence and grip, and it affords you the ability to run lower pressures that help spread impact out over a larger surface area to reduce the risk of damage. And when you combine this girth with the notoriously fast rolling 29 platform, you're left with an incredibly stiff, quick to accelerate wheelset that climbs just as well as it shreds descents. After designing the perfect trail rim, we kept our lightweight and durable design properties in mind with the wheel build, hand-lacing the rims with DT Swiss 350 Classic hubs via 28 DT Swiss Competition Race spokes and brass Pro Lock nipples. Inside, you'll find sealed cartridge bearings and a 36t quick engagement ratchet system for quick accelerations. We also wanted to ensure that each wheel was built correctly, and we found that this could only be achieved by hand. Machines, we found, have a tendency to miss little mistakes that humans catch. Each wheelset comes packaged with a SRAM XD driver, 11-speed freehub, and a tubeless valve stem in order to make tubeless set up a touch easier. *Please note that Shimano freehubs are sold separately. - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Extras: 19 and 31mm OD end cap options included, Roval tubeless tape and tubeless valve, Spare Spoke and Nipple Kit, System Weight Limit: 240lbs / 109kg - Hub: Roval DT Swiss 350 J-bend, 6-bolt, Star Ratchet 36t internals (10 deg), 110x15mm & 142x12mm thru-axle, SRAM XD Freebub, (Convertible freehub and endcaps) - Nipple: DT Swiss Hex Prolock Brass 2.0x14mm - Rim Details: 25mm Depth, 35mm External Width, 30mm Internal Width, ERD 594 - Rim Type: Traverse Carbon, 29, Disc Brake, Tubeless Ready, Zero Bead Hook Design - Spokes: DT Swiss Competition Race J-Bend, Front: Two-Cross 28 count, R: 282mm, L: 279mm, Rear: 282 Two-cross 28 count, DS: 280mm, NDS: 281mm - Tire Size: 1.95 - 3.0 - Max Pressure: 40 psi - Weight: Wheelset 1,800g (including tubeless rim tape and tubeless valve)

Upgrade or refresh your bike. - Durable alloy symmetric rim with 22.5mm internal 27mm external width - Tubeless Ready (TLR) rims allow for quick transition to tubeless system - Includes XD driver, Shimano freehub available separately - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

Born on the World Cup, destined for your local trails. We poured World Championship-winning engineering into developing an all-new alloy for these Control wheels. To increase the new material's durability, we customized our shot peening process—where metal projectiles are shot at the alloy to increase its strength—meeting the precise demands of our XC riders. If that wasn't enough, to eliminate creaking and reduce weight, individually customized sleeves are chosen to bond every single rim. The result is a wildly over-engineered, trail-ripping, best-of-the-best, aluminum wheel; held to the same standards as our highest-end Control SL carbon components. Whether you are looking for a solid set of training wheels that will handle it all or a big upgrade from entry-level wheels, Roval Control Alloy is the go-to wheel. With creak-free hoop construction that's laced to high-performance and proven DT Swiss hubs, you can tap into a wheelset born from World Cup technology that's ready for all riders. - Rim: Control Alloy Asymmetric, 6013 Alloy Shot-Pened, 29", Disc Brake, Zero Bead Hook Design, Tubeless Compatible, Compatible with Tire Inserts - Rim Details: 19mm Depth, 31mm External Width, 27mm Internal Width - Hub: DT Swiss 350 Straight-pull 6-bolt, Star Ratchet 36t internals (10 degs), 110x15mm & 148x12mm, Sram XD Freehub (Convertible freehub ) - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: Sapim D-Light Straightpull, Front: Two-cross (1:1) 28 count, R: 304mm, L: 304mm - Rear: Two-cross (1:1) 28 count, DS: 304mm NDS: 304mm - Nipple: Sapim Secure Lock Double Square Alloy Blk, 2.0 x 18mm, 16cNm - Tire Size: 1.9" - 2.6" - Max Pressure: 1.9"-2.3": 40psi, 2.35"-2.5": 35psi, 2.51" -2.6": 30psi - Weight: Wheelset 1,648g, Front 768g, Rear 880g (excluding 15g, tubeless rim tape, and tubeless valve) - Assembly Method: Hand-built - Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit, 19 and 31mm OD Endcaps, Lifetime Warranty System Weight Limit: 275lbs / 125kg

EX 1700 SPLINE wheels feature a super strong and welded 30 mm wide aluminum rim with a profile design made to withstand the hardest use of Enduro racing, while still keeping the weight low for long and demanding uphills. Laced to double butted competition straightpull spokes, the EX 1700 SPLINE wheels are built to take a beating. - Welded Aluminum rim with 30mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for Enduro applications

Upgrade or refresh your bike. GENUINE REPLACEMENT PARTS When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. PRODUCT DETAILS - Original equipment replacement Bontrager Connection Disc wheels - Durable double-wall rim with 20mm internal, 26mm external width - Black rim graphics and spoke nipples - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

Line Comp 30 is a durable alloy mountain wheel built on wider rims for better tire support. With more support, you can run lower tire pressure for better traction, more control, and a smoother ride. This trail-tough wheel stands up to hard hits, has a proven Tubeless Ready (TLR) design, and includes a 108-tooth Bontrager Rapid Drive hub for quick engagement, fast acceleration, and long-lasting performance. - Rapid Drive 108, j-bend hub instantly transfers effort into forward momentum - Updated rim design and stronger G609 alloy stands up to hard hits - Tubeless Ready (TLR) rims allow for a quick, easy transition to tubeless system - Wider Boost 110/148 hub flanges enhance bracing angle for stiffer wheel - Durable G609 alloy rim with 29mm internal, 33mm external width, 28 hole front/rear - 14G spokes with brass locking nipples - 6 bolt disc, SRAM XD driver, Shimano 10/11 speed available separately - Includes TLR rim strip installed and TLR valve

The new 22.5mm-wide Cross Country specific XR 1501 SPLINE ONE comes with all the advancements of a modern cross country rim, only at 2.5mm more width, providing more air volume for the same size tire which creates more traction and comfort. The asymmetric rim further improves spoke angles, making the wheel even stiffer, more precise handling, and more responsive. The specially developed process for surface hardening and the gentle anodizing result in an unsurpassed surface durability at no additional weight.

Stan's S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan's successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. "The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years," said Creative Director, Chris Currie. "The goal was to take everything we've done for tubeless technology, and put it into a truly bombproof and affordable wheel." Designed according to Stan's WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan's low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim's proven Race spokes, Secure Lock brass nipples, and Stan's faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. Flow S1 Wheelset - Use: Aggressive Trail, All Mountain, Enduro, and Downhill - Internal Rim Width: 29mm - Optimal Tires Size: 2.35 to 2.8-inch - Hubs: Stan's Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Weight: 2134g

ENVE AM30 Carbon Wheelsets use a 30mm inside width rim that is tuned for compliance and damping for performance on All-Mountain, Enduro, and Trail riders. - 30mm internal rim width - Gravity rated impact strength - Rim shape tuned for compliance and damping - Wide Hookless Bead Anti-pinch flat technology

CZR i30 wheels were designed to handle it all, which is why they feature a strategically reinforced carbon layup and are hand built using double-butted spokes, brass nipples and high-engagement hubs featuring top-tier bearings and oversized freehub seals to establish themselves as wheels that simply won't quit. Solid Strip & TCS Tape - Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 3-Cross Lacing & Brass Nipples - Too many companies are trying to save weight by offering "enduro" wheels with 2-cross lacing patterns and inadequate alloy nipples. While those are suitable for XC and light trail usage, there's no replacement for the long-term reliability of a 3-cross lacing pattern with brass nipples holding it all together. Frequency Hub - The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Heavy-Duty Pawl Springs - CZR i30 wheels feature heavy-duty pawl springs that engage with greater force to counteract the additional torque caused by sudden cranking on steep trails. We also offer a Light Pawl-Spring Kit that can be purchased separately for CZR i30 riders who prefer a quieter hub with lighter pawl engagement. Usage: Trail, Enduro

- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires - Durable 6069 aluminum with welded joint and reinforced spoke bed - BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build - Reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride.

What It Is The definitive mountain wheel. The M6 Series defines the modern and varied interpretation of the mountain bike. Loaded with traction and acceleration on the climb, it's also backed with precision and control while absorbing vibrations and impacts on the descent. The M6 Series is designed in two diameters and three widths to ensure your sophisticated preference for tire size and pressure is met with an uncompromising tire-to-rim interface. Who It's For The mountain biker who wonders what is possible, the skeptic afraid of "plastic" wheels, the weight weenie, the Clydesdale, the high-mileage guy, the weekend warrior. It would be easier to describe who it is not for… Why We Made It ENVE showed the world that a mountain bike wheel could be carbon — we're still immensely proud of that achievement. A mountain bike wheel, however, can be so much more. The M6 Series is not about technical challenges, and we refuse to chase specifications in order to be the widest, tallest, or stiffest. For the M6 Series of wheels, the question was not about carbon, rather, "What is the potential of a mountain bike wheel?" Each M6 Series wheel model is designed for the broad range of tire widths, hub configurations, and sizes so that you, the modern trail rider, can choose between them.

- Asymmetric Bead Socket Technology brings Stan's legendary easy inflation and the most reliable airtight seal to wider, offset carbon rims - Custom carbon layup equalizes impact forces on both the long and short sides of the rim, making both stronger - Asymmetric rim shape with offset drilling improves bracing angle and balances spoke tension to create a stronger overall wheel - M-pulse hubs - 250lb Recommended Maximum Rider Weight

After a long climb, the perfect trail lies ahead of your tires: flowy, dusty, varied, endless. Nothing holds you back from entering the All-Mountain thrills with the M 1900 Spline wheels. A rim developed with optimal balance of durability and weight offers efficient climbing characteristics as well as dent resistance on single trails. With experienced wheel building by hand, this wheel is a reliable partner to collect freewheeling moments in the mountains. - Intended use = XC and All-Mountain/Trail - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

Control and stability for enduro riding. - Mountain bike's first tuned carbon wheel system for enduro riding and racing. - Front and rear specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. - Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. - Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip.

The new Stout XC SL 29 rear wheel features 141mm hub spacing and a 9mm QR axle for increased wheel stiffness and improved riding performance. It includes a strong, double-wall alloy rim, stainless steel spokes, brass nipples, and a reliable Shimano Center Lock hub. Charcoal decals complete the look, making this a perfect OE replacement or XC-ready upgrade. - Lightweight and reliable Shimano hub. QR Boost 141x9mm spacing. - Double-wall, disc-specific rim is strong and durable. - Brass nipples hold spoke tension securely and resist rust for added durability. - Stainless spokes won't rust, easing long-term maintenance.

When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. Upgrade or refresh your bike. - Original equipment replacement Bontrager Connection Disc wheels - Durable double-wall rim with 20mm internal, 26mm external width - Black rim graphics and spoke nipples - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

- Black Ops DW1.1 wheelsets for popular modern day BMX and wheelie bikes - Black Ops MX1100 hubs with sealed bearings and laced with DT spokes - 24mm inner rim width supports a variety of modern sizes - OLD: Front: 100mm, Rear: 110mm - Gears: Singlespeed freewheel - Type: Tube only - Size: 29-inch

A carbon structure optimized for impact resistance, a reinforced flange and the ideal resin-carbon fiber ratio make the EXC 1200 Spline the benchmark in the Enduro sector. The rim's inherent strength allows the use of extremely lightweight Aerocomp and Aerolite spokes and generates optimum wheel stiffness. The heart of this wheel is a 180 Straight Pull hub with smooth-running SINC Ceramic bearings and the newest Ratchet EXP freehub system. - Requirement-specific carbon rims are designed for the ultimate enduro riding experience - The carbon rim combined with the DT Aerolite and DT Aero Comp spokes ensure perfect wheel stiffness - The low weight of the 1200 Spline reduces the moment of inertia and increases acceleration, leading to higher average speeds compared with aluminum wheels with the same energy input - 180 straightpull hub is a lighter, stiffer, and more durable hub - SINC ceramic hub bearings are engineered with optimum bearing clearance for minimum friction - Wheels are tubeless ready, with a rim design that ensures a precise and safe fit of the tire even when ridden hard - Nipples have DT Pro Lock to prevent the spoke-nipple connection from loosening - 3 cross spoke pattern, DT ProLock Squorx ProHead aluminum spoke nipples

The XMC 1200 Spline is the ultimate all mountain wheel. A carbon layup specifically tuned for all mountain use makes the rim tough yet super-light. The hubs feature the latest incarnation of DT's Ratchet System. Extremely refined machining and fully lasered graphics make them the lightest hubs DT Swiss has ever made. Together with bladed top-end spokes and perfect DT Swiss build quality, this wheel is made to ride trails with speed and confidence. - Requirement-specific carbon rims are designed for the ultimate all-mountain riding experience - The carbon rim combined with the DT Aerolite and DT Aero Comp spokes ensure perfect wheel stiffness - The low weight of the 1200 Spline reduces the moment of inertia and increases acceleration, leading to higher average speeds compared with aluminum wheels with the same energy input - 180 straightpull hub is a lighter, stiffer, and more durable hub - Alloy presta valve is lightweight - Wheels are tubeless ready, with a rim design that ensures a precise and safe fit of the tire even when ridden hard - Nipples have DT Pro Lock to prevent the spoke-nipple connection from loosening - 3 cross spoke pattern, DT AeroComp straight pull spokes, DT ProLock Squorx ProHead aluminum spoke nipples

Tailored to the needs of performance orientated cross-country riders, the XRC 1501 SPLINE ONE leaves nothing to be desired. Lightweight 30 mm wide carbon rims offer ideal support for modern XC tires. Rolling on race proven and super durable 240 hubs and Competition Race spokes, allowing every bit of energy to be transferred into forward motion. - Designed for Cross Country applications - Carbon rim with 30mm internal width - 240 hub - Competition race spokes and Squorx nipples

EXC 1501 SPLINE ONE combines everything a modern enduro rider wants in a wheel. The 30 mm wide carbon rim gives you the precision to stay on track even on the trickiest lines while a 240 hub keeps it spinning. Both components are held together by performance weight optimized competition race straightpull spokes. - Designed for Enduro applications - Carbon rim with 30mm internal width - 240 hub - Competition race spokes and Squorx nipples

Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel. - Intended use = All-Mountain/Trail, Enduro and Freeride - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring