29-Inch

Control and stability for enduro riding. - Mountain bike's first tuned carbon wheel system for enduro riding and racing. - Front and rear specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. - Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. - Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip.

The Roval Control World Cup wheelset is the fastest in the world, and at just 998 grams, they’re also the lightest. Every detail was obsessively engineered with input from top pros to deliver unmatched performance at the highest level. Beyond its featherweight design, it boasts leading flat resistance, durability, and ride quality, proven by our Factory Team. The Roval Control World Cup isn’t just a wheelset; it’s a new benchmark in XC racing. - Use - XC racing & riding Weight - 998g (w/ valves and rim tape) - Recommended Tires - Fast Trak & Air Trak - Internal Width- 28.5mm - Hubs - Roval LF DT180 EXP - Bearings - Sinc Ceramic - Spokes - Roval Carbon w/ Ti Ends

Envision riding the fastest line, a rocky ridge or over a nasty field of roots without fear. The EXC 1200 Classic supports your most daring line choices, with still plenty of reserve if they don’t go to plan. Our unique process provides maximum carbon compression to push durability further than ever before. A patent-pending technique for layer-by-layer quality control ensures minimized imperfections straight out of the mold, to maximize your commitment. A lighter front rim has 28 DT revolite spokes, while the more durable rear rim has 32. The high- engaging Ratchet DEG makes for a smaller idle distance, crucial for acceleration out of corners. Get ready to push on the stages and break your limits. - Carbon, Hookless tubeless TSS rim with 30mm inner width - DT Swiss Revolite spokes and 180 classic hub - Ratchet DEG with 90 tooth ratchets

The XMC 1200 Spline is the ultimate all mountain wheel. A carbon layup specifically tuned for all mountain use makes the rim tough yet super-light. The hubs feature the latest incarnation of DT's Ratchet System. Extremely refined machining and fully lasered graphics make them the lightest hubs DT Swiss has ever made. Together with bladed top-end spokes and perfect DT Swiss build quality, this wheel is made to ride trails with speed and confidence. - Requirement-specific carbon rims are designed for the ultimate all-mountain riding experience - The carbon rim combined with the DT Aerolite and DT Aero Comp spokes ensure perfect wheel stiffness - The low weight of the 1200 Spline reduces the moment of inertia and increases acceleration, leading to higher average speeds compared with aluminum wheels with the same energy input - Alloy presta valve is lightweight - Wheels are tubeless ready, with a rim design that ensures a precise and safe fit of the tire even when ridden hard - Nipples have DT Pro Lock to prevent the spoke-nipple connection from loosening

The XMC 1200 SPLINE is for anyone who enjoys high-speed climbing and descending. Fit with tubeless tires, the full carbon hookless rim massively reduces the chance of punctures, is super-light, and at 30mm rim width, works to perfection with wide all mountain rubber. The SPLINE hub is the lightest wheel hub ever built by DT Swiss, together with the bladed top end spokes and a perfect DT Swiss wheel build, it complements the carbon rim for the ultimate trail bike wheel set.

The new standard in modern day, high performance cross ccountry wheel sets. Coming with a generous 25mm wide hookless full carbon and tubeless-ready rim, the XRC 1200 SPLINE 25 strikes the perfect balance between low weight and aggressive riding readiness. The lean, CNC machined hubs are super-light while the 25mm tall rim has the inherent stiffness necessary for efficient riding and to precisely hold a line. Together with the renowned DT Swiss build quality, this wheel is what everyone looking to go fast up and down has been waiting for.

Upgrade to our lightest, fastest XC MTB wheels, ridden to victory by the pros of Trek Factory Racing. Race to win Kovee RSL 30 is an ultra-light and durable carbon XC wheel designed to race and win at the highest level, complete with a lower profile rim and smooth-rolling DT Swiss 240s that shave even more weight to create our lightest MTB wheelset ever. All Bontrager carbon wheels are warrantied for life for the original purchaser and come with the added protection of Carbon Care. If your wheel sustains damage from riding within two years of ownership, we'll replace them. It’s that easy. Product details - Premium-level OCLV Carbon rim with 29mm internal width, 35mm external width, and 22mm depth - Shallow profile and wider inner rim width optimizes compliance and tire support for unmatched ride feel - Wider bead hooks add durability and help protect against pinch flats - Ultra-light DT Swiss 240s hubs with ratchet EXP XD Freehub roll smooth and fast - Bead lock rim design and pre-installed TLR tape and valve makes tubeless setup easy - Boost 110/148, 24 spoke front and rear with Sapim CX-Ray bladed spokes and locking nipples (14/17) - CenterLock disc with Ratchet EXP XD driver, additional freehubs available - No rider weight limit, warrantied for life Features: Our lightest ever A meticulously sculpted shallower profile saves weight and offers a more compliant, faster-rolling ride that begs for hard accelerations and is ready to float up climbs. Smoother and stronger A shallower profile helps absorb harsh impacts and thicker bead hooks deliver a strong, durable wheel that's ready to take hits. Wider is faster A wide 29mm internal rim width better supports tire sidewalls and provides additional tire volume so you can run lower pressure for added traction and a smoother, faster ride. Fewer flats A wider hook bead offers a larger outside hook radius which provides more surface area on sharp impacts to help prevent pinch flats. OCLV Carbon Unique materials, layup procedures, and advanced engineering combine for the most sophisticated carbon available. Warrantied for life Carbon wheels can give your ride an instant upgrade in speed and handling – and when you choose Bontrager, your investment is protected. All Bontrager carbon wheels are backed by a lifetime warranty for the original owner. Better together Bontrager offers a complete tubeless system including wheels, tires, sealant, valves, and rim strips. Every part of this setup is designed to work smoothly together and offer top-of-the-line performance.

The Roval Control World Cup wheelset is the fastest in the world, and at just 998 grams, they’re also the lightest. Every detail was obsessively engineered with input from top pros to deliver unmatched performance at the highest level. Beyond its featherweight design, it boasts leading flat resistance, durability, and ride quality, proven by our Factory Team. The Roval Control World Cup isn’t just a wheelset; it’s a new benchmark in XC racing. - Use - XC racing & riding Weight - 998g (w/ valves and rim tape) - Recommended Tires - Fast Trak & Air Trak - Internal Width- 28.5mm - Hubs - Roval LF DT180 EXP - Bearings - Sinc Ceramic - Spokes - Roval Carbon w/ Ti Ends

Smoother is Faster Traverse SL II Hydra2 The Traverse SL II delivers lightweight performance that’s perfect for riders who want to ascend fast and descend with control. It features four key innovations. First, optimized front and rear rim layups boost strength by 15% and 25%, respectively. Second, shallow rim geometry increases vertical compliance by 21% for better impact absorption. Third, the engineered “ankling” enhances traction, stability, and control. Finally, the FlatStop rim bead requires 85% more force to pinch flat. At a Glance Use - Trail Weight - 1,757 grams (with valves and tape) Front: 795g Rear: 962g Recommended Tires - Butcher & Eliminator Internal Width - 30mm Hub - Industry Nine Hydra2 145 Teeth / 0.41 Degrees Spoke Count - 28H Front and Rear Rear Freehub Body - Industry Nine Hydra 2: Sram XD

Upgrade to our lightest, fastest XC MTB wheels, ridden to victory by the pros of Trek Factory Racing. Race to win Kovee RSL 30 is an ultra-light and durable carbon XC wheel designed to race and win at the highest level, complete with a lower profile rim and smooth-rolling DT Swiss 240s that shave even more weight to create our lightest MTB wheelset ever. All Bontrager carbon wheels are warrantied for life for the original purchaser and come with the added protection of Carbon Care. If your wheel sustains damage from riding within two years of ownership, we'll replace them. It’s that easy. Product details - Premium-level OCLV Carbon rim with 29mm internal width, 35mm external width, and 22mm depth - Shallow profile and wider inner rim width optimizes compliance and tire support for unmatched ride feel - Wider bead hooks add durability and help protect against pinch flats - Ultra-light DT Swiss 240s hubs with ratchet EXP XD Freehub roll smooth and fast - Bead lock rim design and pre-installed TLR tape and valve makes tubeless setup easy - Boost 110/148, 24 spoke front and rear with Sapim CX-Ray bladed spokes and locking nipples (14/17) - CenterLock disc with Ratchet EXP XD driver, additional freehubs available - No rider weight limit, warrantied for life Features: Our lightest ever A meticulously sculpted shallower profile saves weight and offers a more compliant, faster-rolling ride that begs for hard accelerations and is ready to float up climbs. Smoother and stronger A shallower profile helps absorb harsh impacts and thicker bead hooks deliver a strong, durable wheel that's ready to take hits. Wider is faster A wide 29mm internal rim width better supports tire sidewalls and provides additional tire volume so you can run lower pressure for added traction and a smoother, faster ride. Fewer flats A wider hook bead offers a larger outside hook radius which provides more surface area on sharp impacts to help prevent pinch flats. OCLV Carbon Unique materials, layup procedures, and advanced engineering combine for the most sophisticated carbon available. Warrantied for life Carbon wheels can give your ride an instant upgrade in speed and handling – and when you choose Bontrager, your investment is protected. All Bontrager carbon wheels are backed by a lifetime warranty for the original owner. Better together Bontrager offers a complete tubeless system including wheels, tires, sealant, valves, and rim strips. Every part of this setup is designed to work smoothly together and offer top-of-the-line performance.

Industry Nine’s most advanced alloy Trail rim joins forces with the revolutionary Solix M hub and spoke system chassis, creating a wheelset equipped for the rigors of long days in the saddle, tough ascents, rowdy descents, and unpredictable weather. Solix M Trail 285 rims feature a hollow bead wall rim extrusion that not only helps shrug off impacts, but also serves to protect tires from pinch flats. This latest generation TR285 rim is ready to climb for hours to rip some burly backcountry laps before climbing out before dark. Tires up to 2.5” are supported by a minimally hooked, 28.5mm inner width rim that shares pedigree with the hollow bead wall Enduro family. - 5-Pawl Solix freehub body with 605 points of engagement. This patent-protected freehub technology offers unrivaled .59° engagement for the Solix family of wheels - High quality aluminum alloy rim with Hollow Bead Wall promotes increased pinch flat protection and impact resistance - Straight pull, integrated nipple, one-piece aluminum spokes that thread directly into the hubshell resulting in a solid, flex-free junction. No special tools or service procedures required - Combining the immediate response of the Solix freehub with this evolutionary hub and spoke chassis gives the rider a system that can challenge carbon rim wheelsets for ride quality and durability - 2-Year Warranty coverage against defects

The Solix M UL250 is perfectly designed for riders that seek an aluminum performance XC wheelset. In terms of weight, engagement, and ride quality, Solix M UL250 leaves competition in the dust. Tipping the scales at an attractive 1425g, the UL250 leaves nothing to be desired when the course climbs, but rest assured the tubeless-ready 25mm inner width rim is eager to hit the huck lines when the track points back down. At the heart of the wheels are the Solix’s performance-driven feature set. Attack from the start with 605 points of terrain-taming engagement at your command and our all-new full bearing and freehub seal configuration ensures you’ll have more mud on your face than in your hubs. - 5-Pawl Solix freehub body with 605 points of engagement. This patent-protected freehub technology offers unrivaled .59° engagement for the Solix family of wheels - High quality aluminum alloy rim with weatherproof sublimated graphics, tubeless friendly bead shelf, and a proprietary profile to keep dents at bay - Straight pull, integrated nipple, one-piece aluminum spokes that thread directly into the hubshell resulting in a solid, flex-free junction. No special tools or service procedures required - Combining the immediate response of the Solix freehub with this evolutionary hub and spoke chassis gives the rider a system that can challenge carbon rim wheelsets for ride quality and durability - 2-Year Warranty coverage against defects

Just like mixing ketchup and mayonnaise to create the perfect french-fry accoutrement, the perfect wheelset may require combining seemingly disparate things. In this case, it's the venerable 30 SL and 30 HD, built into the respective front and rear wheels to provide the perfect combination of compliance and stiffness for your trail riding please. It's the wheelset ridden by many, and starting today, something that you can have to! By combining the 30 SL and 30 HD in a front and rear wheelset package, Reserve is giving you the inside line to the perfect trail bike wheelset. Stiff and compliant in equal measure, the Frysauce wheelset delivers just what you need, where you need it most. - Designed for trail riding - Carbon fiber construction with 3.6mm asymmetric offset, build stiffer, stronger and more reliable wheels by improving the bracing angles and equalizing the spoke tensions between the drive and non-drive side spokes - Lower profile for added lateral stiffness with increased vertical compliance, redesigned rim bed eases tubeless installation, with a shaped rim bed utilizing offset spoke holes that allows the tire to easily push past the bead bump to seat tubeless tires - 30mm inner width supports 2.2 to 2.5" tires - Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels - Backed by Santa Cruz lifetime warranty - Built with DT Swiss Hubs featuring DEG 90 points of engagement

The all-new M6 is ENVE’s flagship, every day, any-trail, wheel developed for all the bikes, riders, and trails between cross-country and gravity racing disciplines. Like all new M Series wheels, the M6’s rims feature unique shapes and constructions front and back. To accommodate the modern trail rider’s preference for 2.4-2.5” wide tires, the M6’s front rim features an internal rim width of 32mm, and the rear is 29mm. - The rear rim has been optimized for power transmission, tracking, and durability - Wide Hookless Bead - Trail optimized anti-pinch flat protection - Innerdrive 80pt engagement hubs with CX Ray straight pull spokes - Brass external nipples with Nyloc threaded locking insert - Built for Cross-Country, Down-Country, Trail Applications - Approved for E-bike usage - Up to 75nm - Backed by ENVE’s 5-year Factory Warranty and Incidental Damage Protection

SMOOTHER IS FASTER Trail riders who prize nimble handling will be blown away by Traverse SL II's category-leading control, strength-to-weight ratio, and pinch-flat resistance. LIGHTER At 1,645 grams, this is our lightest trail wheelset ever. STRONGER Front and Rear Specific Rims with carbon layups optimized for strength and weight boast 15% greater front wheel strength and 25% more rear wheel strength than the previous Traverse SL. CONTROL-BOOSTING VERTICAL COMPLIANCE 21% more vertically compliant than the previous Traverse SL (delivered through Shallow Rim Shape and front/rear specific layup) enables enhanced terrain hugging and bump-force absorbing control. TRACTION MONSTER Carefully engineered rim shape intentionally flexes for improved support and traction to boost confidence and control. TOUGH LIFE, LONG LIFE Engineered rim offset enables balanced spoke tension for improved fatigue life. Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. SAYONARA PINCH FLATS Optimized "Flat Top" bead profile requires 85% more force to pinch flat compared to a standard round bead, virtually eliminating "snake bites." AIR TIME Thank our genius engineer Chuck Teixeira for inventing the "Roval ThreadBed Valve"; a valve that threads directly into the rim eliminating compression nuts, air loss from rim flex, and makes tire set-up easier, and reduces sealant clogs. INTENDED USE Trail WEIGHT (29) 1,645g 240 EXP (with valve and tape) WHEEL SIZES: 29 2 Year "It Happens" No Fault Crash Replacement - If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs

The M5 Pro marks a new era in M Series cross-country wheels, raising the bar for speed, efficiency, and toughness. It is the result of a more than 4-year development project during which ENVE worked closely with its professional athletes to create something that would give the fastest endurance athletes an edge. Unique front and rear rim construction combined with an all-new shallow rim shape offer an unmatched blend of characteristics, designed to go far and fast. - The rear rim is firmer, to maximize power transmission and impact toughness - Wide Hookless Bead - XC optimized anti-pinch flat protection - Innerdrive 80pt engagement hubs with CX Ray straight pull spokes - Alloy external nipples with Nyloc thread-locking - Built for cross-country race applications - Backed by ENVE’s 5-year Factory Warranty and Incidental Damage Protection

The all-new M8 is ENVE’s flagship gravity wheel, for the weight-conscious rider that typically pedals up what they come down. It’s an excellent choice for enduro riding, bike parks, and courses where smooth terrain and/or weight savings trump the need for the added flat protection with its Protective Rim Strip. The M8 rims were designed to achive the damped, quiet, ride attributes of alloy, but with the toughness and durability of carbon fiber. - The rear rim has been optimized for power transmission, tracking, and durability - Wide Hookless Bead - Gravity optimized anti-pinch flat protection - Innerdrive 80pt engagement hubs with CX Ray straight pull spokes - Brass external nipples with Nyloc threaded locking insert - Built for Enduro, Gravity Race and E-MTB Applications - Approved for E-bike use - Backed by ENVE’s 5-year Factory Warranty and Incidental Damage Protection

The XMC 1200 Spline is the ultimate all mountain wheel. A carbon layup specifically tuned for all mountain use makes the rim tough yet super-light. The hubs feature the latest incarnation of DT's Ratchet System. Extremely refined machining and fully lasered graphics make them the lightest hubs DT Swiss has ever made. Together with bladed top-end spokes and perfect DT Swiss build quality, this wheel is made to ride trails with speed and confidence. - Requirement-specific carbon rims are designed for the ultimate all-mountain riding experience - The carbon rim combined with the DT Aerolite and DT Aero Comp spokes ensure perfect wheel stiffness - The low weight of the 1200 Spline reduces the moment of inertia and increases acceleration, leading to higher average speeds compared with aluminum wheels with the same energy input - 180 straightpull hub is a lighter, stiffer, and more durable hub - Alloy presta valve is lightweight - Wheels are tubeless ready, with a rim design that ensures a precise and safe fit of the tire even when ridden hard - Nipples have DT Pro Lock to prevent the spoke-nipple connection from loosening - 3 cross spoke pattern, DT AeroComp straight pull spokes, DT ProLock Squorx ProHead aluminum spoke nipples

Envision riding the fastest line, a rocky ridge or over a nasty field of roots without fear. The EXC 1200 Classic supports your most daring line choices, with still plenty of reserve if they don’t go to plan. Our unique process provides maximum carbon compression to push durability further than ever before. A patent-pending technique for layer-by-layer quality control ensures minimized imperfections straight out of the mold, to maximize your commitment. A lighter front rim has 28 DT revolite spokes, while the more durable rear rim has 32. The high- engaging Ratchet DEG makes for a smaller idle distance, crucial for acceleration out of corners. Get ready to push on the stages and break your limits. - Carbon, Hookless tubeless TSS rim with 30mm inner width - DT Swiss Revolite spokes and 180 classic hub

A carbon structure optimized for impact resistance, a reinforced flange and the ideal resin-carbon fiber ratio make the EXC 1200 Spline the benchmark in the Enduro sector. The rim's inherent strength allows the use of extremely lightweight Aerocomp and Aerolite spokes and generates optimum wheel stiffness. The heart of this wheel is a 180 Straight Pull hub with smooth-running SINC Ceramic bearings and the newest Ratchet EXP freehub system. - Requirement-specific carbon rims are designed for the ultimate enduro riding experience - The carbon rim combined with the DT Aerolite and DT Aero Comp spokes ensure perfect wheel stiffness - The low weight of the 1200 Spline reduces the moment of inertia and increases acceleration, leading to higher average speeds compared with aluminum wheels with the same energy input - 180 straightpull hub is a lighter, stiffer, and more durable hub - SINC ceramic hub bearings are engineered with optimum bearing clearance for minimum friction - Wheels are tubeless ready, with a rim design that ensures a precise and safe fit of the tire even when ridden hard - Nipples have DT Pro Lock to prevent the spoke-nipple connection from loosening - 3 cross spoke pattern, DT ProLock Squorx ProHead aluminum spoke nipples

The XMC 1200 Spline is the ultimate all mountain wheel. A carbon layup specifically tuned for all mountain use makes the rim tough yet super-light. The hubs feature the latest incarnation of DT's Ratchet System. Extremely refined machining and fully lasered graphics make them the lightest hubs DT Swiss has ever made. Together with bladed top-end spokes and perfect DT Swiss build quality, this wheel is made to ride trails with speed and confidence. - Requirement-specific carbon rims are designed for the ultimate all-mountain riding experience - The carbon rim combined with the DT Aerolite and DT Aero Comp spokes ensure perfect wheel stiffness - The low weight of the 1200 Spline reduces the moment of inertia and increases acceleration, leading to higher average speeds compared with aluminum wheels with the same energy input - 180 straightpull hub is a lighter, stiffer, and more durable hub - Alloy presta valve is lightweight - Wheels are tubeless ready, with a rim design that ensures a precise and safe fit of the tire even when ridden hard

- Asymmetric Bead Socket Technology brings Stan's legendary easy inflation and the most reliable airtight seal to wider, offset carbon rims - Custom carbon layup equalizes impact forces on both the long and short sides of the rim, making both stronger - Asymmetric rim shape with offset drilling improves bracing angle and balances spoke tension to create a stronger overall wheel - M-pulse hubs - 250lb Recommended Maximum Rider Weight

The EXC 1501 Spline One wheel features a tough enduro carbon rim that’s paired with a durable 240 hub, creating a reliable wheel for going fast. A 30 mm internal width rim is designed for serious business on the trail, offers precise control to reach and hit the line that isn't always the easiest, but is the fastest. At its center, the legendary 240 hub reliably transmits the rider's power and is held together by DT competition race straightpull spokes optimized for performance and weight. - Designed for Enduro applications - Carbon, hookless tubeless rim with 30mm internal width - 240 hub - Competition race spokes - Ratchet DEG freehub system with 90 points of engagement

The XMC 1501 Spline One is an ideal all-rounder wheel featuring a 240 hub combined with a carbon rim that results in a durable and versatile package. The low weight of the carbon rim allows you to save energy when climbing so that you can attack long descents on varied surfaces where grip is paramount. The 240 hub has proven its reliability time and time again with its lightweight and reliable freehub system to transmit power for a long time. Double-butted DT competition race straightpull spokes and top quality wheel construction round out the XMC 1501 Spline One wheel. - Designed for epic adventures and all-around applications - Carbon, hookless tubeless rim with 30mm internal width - 240 hub - Competition race spokes - Ratchet DEG freehub system with 90 points of engagemen

The all-new M6 is ENVE’s flagship, every day, any-trail, wheel developed for all the bikes, riders, and trails between cross-country and gravity racing disciplines. Like all new M Series wheels, the M6’s rims feature unique shapes and constructions front and back. To accommodate the modern trail rider’s preference for 2.4-2.5” wide tires, the M6’s front rim features an internal rim width of 32mm, and the rear is 29mm. - The front rim’s additional width and lighter construction maximize compliance, traction, and tire stability - Wide Hookless Bead - Trail optimized anti-pinch flat protection - Innerdrive hubs with CX Ray straight pull spokes - Brass external nipples with Nyloc threaded locking insert - Built for Cross-Country, Down-Country, Trail Applications - Approved for E-bike usage - Up to 75nm

Riding is believing with the Zipp 1ZERO HITOP SW MTB wheelset when it comes to making you faster. Trail compliance is vital, with modern cross-country races becoming rougher and more challenging. No longer is it good enough for an XC wheelset to be stiff above all else. Instead, a wheelset should feel alive. The 1ZERO HITOP SW carbon rim complies with the terrain thanks to Zipp's proprietary HITOP Technology for carbon layup. The result is a lightweight XC wheel that carries speed through all sections of the trail, rocks, roots, and ruts with the durability required for a trail bike with up to 130mm of travel. A compliant wheel provides more confidence. You don't have to work hard to spin it up to speed or fight your bike when things get chunky. The 1ZERO HITOP SW also comes with the TireWiz tire-pressure monitoring system, so you'll always have your tire pressure dialed in for optimal performance. Among the lightest on the market, the ZM2 SL hubset ensures you'll be quick to accelerate and back on the pedals sooner after corners with the 1ZERO HITOP SW. - HITOP Technology produces proprietary rim layup to provide compliance and confidence when the trail gets rough - Low weight for effortless accelerations and climbing - Winged rim provides a smooth resting surface for the tire, reducing the chance of pinch flats after a rock hit - TireWiz 2.0 tire-pressure monitoring system features a seamless design - ZM2 SL hub with 66 points of engagement - Standard or Torque Cap options on the front hub - XD or Microspline driver-body options - Lifetime Warranty

Zipp's 3ZERO MOTO carbon 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure trail speed. This wheel and its MOTO Technology have already been proven by multiple victories in the Enduro World Series with our pioneering partnership with the Lapierre Zipp Collective. While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers—uninhibited by legacy technology—took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most. At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features 12 pawls and 132 points of engagement for a quicker response. The hub's improved seal design means better durability on rough terrain. Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension - German-engineered hubset features 12 pawls and 132 points of engagement for quicker response and also has improved durability - Lifetime Warranty

The M5 Pro marks a new era in M Series cross-country wheels, raising the bar for speed, efficiency, and toughness. It is the result of a more than 4-year development project during which ENVE worked closely with its professional athletes to create something that would give the fastest endurance athletes an edge. Unique front and rear rim construction combined with an all-new shallow rim shape offer an unmatched blend of characteristics, designed to go far and fast. - The front rim is more compliant to allow the wheel and tire to contour over and around terrain, reducing the jarring sensations of repeated frontal impacts - Wide Hookless Bead - XC optimized anti-pinch flat protection - Innerdrive hubs with CX Ray straight pull spokes - Alloy external nipples with Nyloc thread-locking - Built for cross-country race applications - Backed by ENVE’s 5-year Factory Warranty and Incidental Damage Protection

The all-new M8 is ENVE’s flagship gravity wheel, for the weight-conscious rider that typically pedals up what they come down. It’s an excellent choice for enduro riding, bike parks, and courses where smooth terrain and/or weight savings trump the need for the added flat protection with its Protective Rim Strip. The M8 rims were designed to achive the damped, quiet, ride attributes of alloy, but with the toughness and durability of carbon fiber. - The front rim’s additional width and lighter construction maximize compliance, traction, and tire stability - Wide Hookless Bead - Gravity optimized anti-pinch flat protection - Innerdrive hubs with CX Ray straight pull spokes - Brass external nipples with Nyloc threaded locking insert - Built for Enduro, Gravity Race and E-MTB Applications - Approved for E-bike use - Backed by ENVE’s 5-year Factory Warranty and Incidental Damage Protection

World Cup speed meets trail durability World Cup Fast, Trail Tough XC speed meets trail-ready durability with the new Control SL VI 350. Weighing just 1,478g, these fly up climbs, they feature a tuned carbon lay-up for better traction and a stronger rear rim for impact resistance. DT Swiss Revolution spokes pair with the durable and fast engaging DT Swiss Star Ratchet for 10 degree engagement. A 4mm FlatStop bead hook minimizes pinch flats, and an asymmetric rim profile boosts longevity—blending speed, control, and durability for elite performance. At a Glance Use XC Racing & Down Country Ripping Weight 1,478g (with tape and valves) Rim Details Depth: 25mm, External Width: 37mm, Internal Width: 29mm, Bead Hook Width: FlatStop 4mm Hub & Engagement Hub: DT Swiss, Star Ratchet 36T
10 degrees Spokes: DT Swiss Revolution spokes Tire Recommendation AirTrack and Fast Track Tires Approved Tire Widths: 1.9” to 2.6” Brake Mount 6-bolt